Document Archives

Design Heat Transmission Coefficients, Chapter 22

• ID:

  17

• ESCSI:

  3201.006

• Author:

  [Possibly the following: Rowley, F.B.; A.B. Algren; J.L. Blackshaw]

• Publication Name:

  TC 4.4, Insulation and Moisture Barriers, 1977 Fundamental Handbook

• Type of Publication:

  Article

• Publisher:

  ASHRAE (American Society of Heating, Refrigeration & Air Conditioning Engineers

• Dated:

  1977

• Issue/Volume:

• Other ID:

• Page(s):

  22.1 - 22.27

• Reference List:

  Y

• Abstract:

  This chapter 22 of 1977 Fundamentals Handbook cover the following: Heat Transfer Definitions and Symbols; Surface Conductance; Calculating Overall Coefficients; Overall Coefficients and Their Practical Use; Insulating Constructions; Adjustment for Framing; Curtain Walls; Ventilated Attics; Foundation Coefficients; Glass and Door oefficients; Wind Effects’ Heat Loss Due to Infiltration; Calculating Surface Temperatures; Conductivity of Industrial Insulations; Bare Surface Heat Losses; Heat Flow Calculations; Buried Pipe Lines; Thermal Characteristics and Response Factors for Floors, Walls and Roofs. Design values for lightweight aggregate masonry material and Lightweight aggregate CMV are provided on pp. 22.15 and 22.16. Table 4D provides coefficients of transmission (V) of masonry walls in which cinder aggregate block is replaced with 6-in lightweight aggregate block with cores filled.